background image

LSQT1060 B

Multimedia Projection HDTV

Operating Instructions

PT-52LCX66/PT-56LCX66/PT-61LCX66/
PT-52LCX16/PT-56LCX16/PT-61LCX16

Models No.

(USA)

Three Important Reasons to Register Your Product 
Immediately!

1  Protect Your New Investment...

 

Register your new Projection Display for insurance purposes 
in case your new Projection Display is stolen.

2 Product 

safety 

notification...

 

Registering your product can help us to contact you in the 
unlikely event a safety notification is required under the 
Consumer Product Safety Act.

3  Improved Product Development...

 

Help us continue to design products that meet your needs.

Register online at 

www.panasonic.com/register

For assistance, please call : 
1-888-VIEW PTV(843-9788)

or, contact us via the web at:
http://www.panasonic.com/contactinfo

(Puerto Rico)

For assistance, please call : 
787-750-4300

or visit us at www.panasonicpr.com

Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.

This operating instruction book is designed for use with models PT-52LCX66, PT-56LCX66, PT-61LCX66, 
PT-52LCX16, PT-56LCX16 and PT-61LCX16. Illustrations in this manual show the PT-56LCX16.

* The presence of the DTV certification mark indicates that this product will 

successfully receive digital television transmissions that conform to any and all of the 
video formats described in the ATSC Digital Television Standard.

ATSC CERTIFIED *

DIGITAL TELEVISION

As an 

E

NERGY 

S

TAR

®

 Partner, Panasonic Corporation of North America has 

determined that this product or product model meets the 

E

NERGY 

S

TAR

®

 guidelines 

for energy efficiency.

Summary of Contents for PT-56LCX66

















































































Reviews: