Toyota Land Cruiser 2004 Page 74 Owner'S Manual Download

Page: 74 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

CAUTION

The SRS side airbag and curtain
shield airbag system is designed

only as a supplement to the prima-

ry protection of the driver, front
passenger and second seat passen-

ger seat belt systems. To ensure

maximum protection in an accident,
the driver and all passengers in the

vehicle must wear their seat belts

properly. Wearing a seat belt prop-
erly during an accident reduces the

chances of death or serious injury

or being thrown out of the vehicle.
For instructions and precautions

concerning the seat belt system,

see “Seat belts” on page 48.

Do not allow anyone to lean his/her
head or any part of his/her body

against the door or the area of the

seat, front pillar, rear pillar or roof
side rail from which the SRS side

airbag and curtain shield airbag

deploy even if he/she is a child
seated in the child restraint system.

It is dangerous if the SRS side air-

bag and curtain shield airbag in-
flate, and the impact of the deploy-

ing airbag could cause death or se-

rious injury to the occupant.

Improperly seated and/or restrained

infants and children can be killed
or seriously injured by the deploy-

ing airbags. An infant or child who

is too small to use a seat belt
should be properly secured using a

child

restraint

system.

Toyota

strongly recommends that all in-
fants and children be placed in the

rear seats of the vehicle and prop-

erly restrained. The rear seats are
the safest for infants and children.

For instructions concerning the

installation of a child restraint sys-
tem, see “Child restraint” on page

76.

Roll sensing of curtain shield airbags off

switch

The roll sensing of curtain shield air-
bags off switch can turn off the curtain

shield airbags in a vehicle rollover. This

switch should only be used in a situa-
tion where the inflation is not desired

(such as extreme

−

off road driving).

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands