Toyota Land Cruiser 2004 Page 266 Owner'S Manual Download

Page: 266 / 335

258

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

NOTICE

Tighten all the joints securely.

Otherwise, the extension may

come off and it may damage

the paint or vehicle body.

—Raising your vehicle

6. After making sure no one is in

the vehicle, raise it high enough

so that the spare tire can be

installed.

Remember you will need more ground

clearance when putting on the spare

tire than when removing the flat tire.

To raise the vehicle, insert the jack

handle end into the joint of the jack

(it is a loose fit) and turn it clockwise

with the handle, making sure the han-

dle remains firmly fitted onto the jack

handle end. As the jack touches the

vehicle and begins to lift, double

−

check that it is properly positioned.

CAUTION

Never get under the vehicle when

the vehicle is supported by the

jack alone.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands