Toyota Land Cruiser 2004 Owner'S Manual Download Page 110

Page: 110 / 335

102

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

NOTICE

Do not put magnets or a metal object
near the inside rear view mirror. Do-

ing this may cause malfunction of the

compass sensor.

CALIBRATING THE COMPASS (deviation

calibration)

The direction display on the compass

deviates from the true direction deter-
mined by the earth’s magnetic field, The

amount of deviation varies according to

the geographic position of the vehicle.
To adjust for this deviation, stop the ve-

hicle and push the button for longer than

about 6 seconds until the number (1

−

15)

appears on the display. Then push the

button again, referring to the following

map to select the number of the zone
where the vehicle is.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Toyota Land Cruiser 2004, Owner'S Manual, Page: 110 / 335

Search results

Summary of Contents for Land Cruiser 2004

Reviews: