Toyota Land Cruiser 2004 Page 49 Owner'S Manual Download

Page: 49 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

4. Remove the seat hook covers from

the back of the seat cushion, and
install them over the seat hooks.

CAUTION

Be sure to apply the covers on the
seat hooks, or you may get burned

when they become hot.

When returning the second seat to its

original position, remove the seat hook

covers from the floor and install them in
the back of the seat cushion.

WHEN  RETURNING  THE  SECOND  SEAT
If  you  cannot  raise  the  seatback  be-
cause  of  the  locked  seat  belt,  do  not

try it hard. Release the lock of the seat
belt in the following way. Push in the

lower front edge of the seatback cush-

ion to slacken the seat belt (1) and let
the seat belt retract a little (2).

CAUTION

When returning seats to their original
position, observe the following pre-

cautions in order to prevent personal

injury in a collision or sudden stop:

Make sure the seat is securely

locked by pushing forward and rear-

ward on the top of the seatback
and by trying to pull up the edge

of the bottom cushion. Failure to

do so will prevent seat belt from
operating properly.

Make sure the seat belts are not
twisted or caught under the seat

and are arranged in their proper

position and are ready to use.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands