Toyota Land Cruiser 2004 Page 262 Owner'S Manual Download

Page: 262 / 335

254

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

2. Remove the access hole cover on

the rear bumper with a flat

−

bladed

screwdriver.

To protect the paint, place several

sheets of paper over the paintwork.

3. Insert the jack handle end into the

lowering screw through the access

hole and turn it counterclockwise

with pushing it to the front lightly.

4. After the tire is lowered completely

to the ground, remove the holding

bracket as shown in the illustration.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands