Toyota Land Cruiser 2004 Page 217 Owner'S Manual Download

Page: 217 / 335

209

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

For detailed information on oil level check,

see “Checking the engine oil level” on

page 288.

Your engine is fitted with iridium

−

tipped

spark plugs.

NOTICE

Use only iridium

−

tipped spark plugs

and do not adjust gaps for your en-

gine performance and smooth drivabil-

ity.

Brake system

BRAKE SYSTEM

This brake system has two independent

hydraulic circuits. If either circuit should
fail, the other will still work. However, the

pedal will be harder to press, and your

stopping distance will increase. Also, the
brake system warning light may come on.

CAUTION

Do not drive your vehicle with only a
single brake system. Have your

brakes fixed immediately.

BRAKE BOOSTER

The brake booster uses brake fluid pres-
surized by the pump to power

−

assist the

brakes. If the brake booster fails during

driving, the brake system warning light
comes on and buzzer sound continuously.

In this case, the brakes may not work

properly. If they do not work well, depress
the brake pedal firmly. If the brake system

warning light comes on, immediately stop

your vehicle and contact your Toyota deal-
er.

Iridium

−

tipped spark plugs

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands