Toyota Land Cruiser 2004 Page 89 Owner'S Manual Download

Page: 89 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

3. To remove the infant seat, press the

buckle release button.

(B) CONVERTIBLE SEAT INSTALLATION
A convertible seat must be used in for-
ward

−

facing or rear

−

facing position de-

pending on the age and size of the
child. When installing, follow the

manufacturer’s instruction about the ap-

plicable age and size of the child as
well as directions for installing the

child restraint system.

CAUTION

Do not install a child restraint system
on the third seat if it interferes with

the lock mechanism of the second

seats. Otherwise, the child or second
seat occupant(s) may be killed or se-

riously injured in case of sudden

braking or a collision.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands