Toyota Land Cruiser 2004 Page 88 Owner'S Manual Download

Page: 88 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the lap portion of the belt is

not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent your

child from properly latching the tab
and buckle.

If the seat belt does not function
normally, it cannot protect your

child from death or serious injury.

Contact

your

Toyota

dealer

immediately. Do not install the child

restraint seat on the seat until the

seat belt is fixed.

2. While pressing the infant seat firmly

against the seat cushion and seatback,
tighten the lap belt by pulling its free

end to hold the infant seat securely.

CAUTION

Push and pull the child restraint sys-
tem in different directions to be sure

it is secure. Follow all the installation

instruction provided by its manufac-
turer.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands