Toyota Land Cruiser 2004 Owner'S Manual Download Page 103

Page: 103 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

13C009

Type A

13C008

Type B

Type A—

2. Latch the hooks of lower straps onto

the anchorages and tighten the lower
straps.

Type B—

2. Latch the buckles onto the anchor-

ages

If your child restraint system has a top

strap, it should be anchored. (For the

installation  of  the  top  strap,  see  “—Using
a  top  strap”  on  page  92.)
For  the  installation  details,  refer  to  the

instruction manual equipped with each
product.

CAUTION

When using the lower anchorages
for the child restraint system, be

sure that there are no irregular ob-

jects around the anchorages or that
the seat belt is not caught.

Push and pull the child restraint

system in different directions to be
sure it is secure. Follow all the

installation instructions provided by

its manufacturer.

Do not install a child restraint sys-

tem on the rear seat if it interferes
with the lock mechanism of the

front seats. Otherwise, the child or

front seat occupant(s) may be killed
or seriously injured in case of sud-

den braking or a collision.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Toyota Land Cruiser 2004, Owner'S Manual, Page: 103 / 335

Search results

Summary of Contents for Land Cruiser 2004

Reviews: