Toyota Land Cruiser 2004 Page 70 Owner'S Manual Download

Page: 70 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

If the seat belt extender has been
connected to the driver’s seat belt

buckle without wearing the seat belt

when using the extender in the
driver’s seat, the SRS driver’s air-

bag system will judge that the driv-

er wears the seat belt even if not
wearing it. In this case, the driver’s

airbag may not activate correctly,

causing death or serious injury in
the event of collision. Be sure to

wear the seat belt with the seat belt

extender.

For instructions and precautions con-

cerning the seating position, see
“—Front seat precautions” on page

34.

Do not sit on the edge of the seat

or lean against the dashboard when

the vehicle is in use, since the

front passenger airbag could inflate

with considerable speed and force.

Anyone who is up against, or very

close to, an airbag when it inflates,

can be killed or seriously injured.

Sit up straight and well back in the

seat, and always use your seat belt

properly.

Toyota strongly recommends that all

infants and children be placed in

the rear seat of the vehicle and be

properly restrained.

Do not allow a child to stand up or

kneel on the front passenger seat,

since the front passenger airbag

could

inflate with considerable

speed and force. Otherwise, the

child may be killed or seriously in-

jured.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands