Toyota Land Cruiser 2004 Page 46 Owner'S Manual Download

Page: 46 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

I13220c

SEATBACK ANGLE ADJUSTING LEVER
Lean forward and pull the lever toward

you. Then lean back to the desired
angle and release the lever.

CAUTION

To reduce the risk of sliding under
the lap belt during a collision,

avoid reclining the seatback any

more than needed. The seat belts
provide maximum protection in a

frontal or rear collision when the

second seat passengers are sitting
up straight and well back in the

seats. If you are reclined, the lap

belt may slide past your hips and
apply restraint forces directly to the

abdomen. Therefore, in the event of

a frontal collision, the more the
seat is reclined, the greater the risk

of personal injury.

Do not adjust the seat while the

vehicle is moving.

After adjusting the seatback, push
your body back against the seat to

make sure the seat is locked in

position.

For easy access to the third seat, do

this;

1. Lower the head restraint to the low-

est position.

2. Push the seatback angle adjusting

lever and pull the seat cushion lock

release lever or pull the strap.

After passengers are in, return the seat

until it locks.

—Adjusting second seats

—Moving second seat for

third seat entry

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands