Toyota Land Cruiser 2004 Page 307 Owner'S Manual Download

Page: 307 / 335

299

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

CAUTION

Observe the following instructions.
Otherwise, an accident may occur re-

sulting in death or serious injuries.

Do not use snow tires other than
the manufacturer’s recommended

size, as this may cause dangerous

handling characteristics resulting in
loss of control.

Do not use snow tires of different
brands, sizes, construction or tread

patterns, as this may cause danger-

ous handling characteristics result-
ing in loss of control.

SNOW TIRE INSTALLATION
Snow tires should be installed on all

wheels.

Installing snow tires on the rear wheels

only can lead to an excessive difference
in road grip capability between the front

and rear tires which could cause loss of

vehicle control.
When storing removed tires, you should

store them in a cool dry space.
Mark the direction of rotation and be sure

to install them in the same direction when

replacing.

CAUTION

Do not drive with the snow tires
incorrectly inflated.

Never drive over 105 km/h (65 mph)

with any type of snow tires.

Cross chain

Side chain

TIRE CHAIN SELECTION
Use the tire chains of correct size.

Use the following type chains.
For P275/65R17 113S and P275/60R18

111H tires

mm (in.)

A Diameter of side chain:

3.5 (0.14)

B Diameter of cross chain:

4.0 (0.16)

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands