Toyota Land Cruiser 2004 Page 221 Owner'S Manual Download

Page: 221 / 335

213

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

The brake assist system may not work for

about 60 seconds after the engine is

started.
For an explanation of this system’s warn-

ing light, see “Service reminder indicators

and warning buzzers” on page 122.

Brake pad wear limit indicators

The brake pad wear limit indicators on

your disc brakes give a warning noise
when the brake pads are worn to where

replacement is required.

If you hear a squealing or scraping noise

while driving, have the brake pads

checked and replaced by your Toyota
dealer as soon as possible. Expensive ro-

tor damage can result if the pads are not

replaced when necessary.

Rear step bumper

The rear step bumper is for rear end

protection and easier step

−

up loading.

To get on the rear step bumper, use the

shaded area between the arrows in the
illustration.

CAUTION

Do not allow more than one person
to get on the rear step bumper at

a time. It is designed for only one

person.

Never drive the vehicle with anyone

on the rear step bumper.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands