Toyota Land Cruiser 2004 Page 93 Owner'S Manual Download

Page: 93 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the lap and shoulder portions

of the belt are not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent your

child from properly latching the tab
and buckle.

If the seat belt does not function
normally, it cannot protect your

child from death or serious injury.

Contact

your

Toyota

dealer

immediately. Do not install the child

restraint seat on the seat until the

seat belt is fixed.

2. Fully extend the shoulder belt to put it

in the lock mode. When the belt is
then retracted even slightly, it cannot

be extended.

To hold the infant seat securely, make

sure the belt is in the lock mode before

letting the belt retract.

3. While pressing the infant seat firmly

against the seat cushion and seatback,
let the shoulder belt retract as far as

it will go to hold the infant seat secure-

ly.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands