Toyota Land Cruiser 2004 Page 132 Owner'S Manual Download

Page: 132 / 335

124

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

(a) Brake System Warning Light and

Buzzer

This light comes on in the following cases
when the ignition key is in the “ON” posi-

tion.

When the parking brake is applied...

This light comes on for a few seconds

when the ignition key is in the “ON” posi-
tion even after the parking brake is re-

leased.

When the brake fluid level is low...

CAUTION

It is dangerous to continue driving
normally when the brake fluid level is

low.

When the hydraulic brake booster

fails...

If the hydraulic booster causes an problem

resulting in poor braking performance, the

warning light comes on and buzzer sounds
continuously.

Have your vehicle checked at your

Toyota dealer in the following cases:

The light does not come on even if the
parking brake is applied when the igni-

tion key is in the “ON” position.

The light does not come on even if the

ignition key is turned on with the park-

ing brake released.

A warning light turning on briefly during

operation does not indicate a problem.

CAUTION

If any of the following conditions oc-
cur, immediately stop your vehicle at

a safe place and contact your Toyota

dealer.

The light does not turn off even

after the parking brake is released

while the engine is running.

The warning buzzer comes on to-

gether with the warning light.

In either case, this can indicate that

the brakes may not work properly and

your stopping distance will become
longer. Depress the brake pedal firmly

and bring the vehicle to an immediate
stop.

The brake system warning light re-
mains on together with the “ABS”

warning light.

In this case, not only the anti

−

lock

brake system will fail but also the

vehicle will become extremely unsta-

ble during braking.

Any of the following conditions may oc-
cur, but do not indicate a malfunction:

The light may stay on for about 60

seconds after the ignition key is turned
to “ON” position. It is normal if it goes

out after a while.

Depressing the brake pedal repeatedly

may turn on the warning light and

buzzer. It is normal if the light goes
out and the buzzer stops sounding af-

ter a few seconds.

You may hear a small sound in the

engine compartment after the engine is

started or the brake pedal is depressed
repeatedly. This is a pump pulsating

sound of the brake system, and it is

not a malfunction.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands