Toyota Land Cruiser 2004 Page 247 Owner'S Manual Download

Page: 247 / 335

239

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

1 Coupler

2 Trailer ball

MATCHING TRAILER BALL HEIGHT TO

TRAILER COUPLER HEIGHT

No matter which class of tow hitch ap-

plies, for a safe trailer hookup, the trailer

ball setup on must be the proper height

for the coupler on the trailer.

BRAKES AND SAFETY CHAINS

Toyota recommends trailers with

brakes that conform to any applica-
ble federal and state/provincial regu-

lations.

A safety chain must always be used

between the towing vehicle and the

trailer. Leave sufficient slack in the
chain for turns. The chain should

cross under the trailer tongue to

prevent the tongue from dropping to
the ground in case it becomes dam-

aged or separated. For correct safety

chain procedures, follow the hitch or
trailer manufacturer’s recommenda-

tions.

CAUTION

If the total trailer weight exceeds
453 kg (1000 lb.), trailer brakes are

required.

Never tap into your vehicle’s hy-
draulic system as it would lower its

braking effectiveness.

Never tow a trailer without using a

safety chain securely attached to

both the trailer and the vehicle. If
damage occurs to the coupling unit

or hitch ball, there is danger of the

trailer wandering over into another
lane.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands