Toyota Land Cruiser 2004 Page 27 Owner'S Manual Download

Page: 27 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

NOTICE:
This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are

designed to provide reasonable protec-

tion against harmful interference in a
residential installation. This equipment

generates, uses and can radiate radio

frequency energy and, if not installed
and used in accordance with the instruc-

tions, may cause harmful interference to

radio communications. However, there is
no guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful interfer-
ence to radio or television reception,

which can be determined by turning the

equipment off and on, the user is en-
couraged to try to correct the interfer-

ence by one or more of the following

measures:

Reorient or relocate the receiving an-

tenna.

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet
on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced
radio/TV technician for help.

FCC WARNING:
Changes or modifications not ex-

pressly approved by the party respon-

sible for compliance could void the
user’s authority to operate the equip-

ment.

CAUTION

Changes or modifications not ex-
pressly approved by the party respon-

sible for compliance could void the

user’s authority to operate the equip-
ment.

REPLACING THE BATTERY

For replacement, use a CR1616 lithium

battery or equivalent and a special screw-
driver.

CAUTION

Special care should be taken to pre-
vent small children from swallowing

the removed battery or components.

NOTICE

When replacing the terminal battery,
be careful not to lose the compo-

nents.

Replace only with the same or
equivalent type recommended by a

Toyota dealer.

Dispose of used battery according

to the local laws.

Replace the battery by following these
procedures:

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands