Toyota Land Cruiser 2004 Page 62 Owner'S Manual Download

Page: 62 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

Be sure to wear the seat belt with-
out the seat belt extender if you

can fasten the seat belt without the

extender.

Do not use the seat belt extender

when installing a child restraint

system on the front or rear passen-
ger seat. If installing a child re-

straint system with the seat belt

extender connected to the seat belt,
the seat belt will not securely hold

the child restraint system, which

could cause death or serious injury
to the child or other passengers in

the event of collision.

To connect the extender to the seat

belt, insert the tab into the seat belt
buckle so that the “PRESS” signs on

the buckle release buttons of the ex-

tender and the seat belt are both facing
outward as shown.

You  will  hear  a  click  when  the  tab  locks
into  the  buckle.
When  releasing  the  seat  belt,  press  on

the buckle release button on the extender,
not on the seat belt. This helps prevent

damage to the vehicle interior and extend-

er itself.
When not in use, remove the extender

and store in the vehicle for future use.

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the lap and shoulder portions

of the belt and the seat belt extend-
er are not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent you
from properly latching the tab and

buckle.

If the seat belt does not function

normally, immediately contact your

Toyota dealer. Do not use the seat
until the seat belt is fixed, because

it cannot protect an adult occupant

or your child from injury.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands