Toyota Land Cruiser 2004 Page 146 Owner'S Manual Download

Page: 146 / 335

138

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

(e) Parking

1. Bring the vehicle to a complete stop.
2. Pull the parking brake lever up fully to

securely apply the parking brake.

3. With the brake pedal pressed down,

shift the selector lever to the “P” posi-

tion.

If the four–wheel drive control is in the

“N” position while the selector lever is in

the “P” position, the transmission will
damage and the wheels will not lock.

CAUTION

While the vehicle is moving, never
attempt to move the selector lever

into “P” position under any circum-

stances. Serious mechanical damage
and loss of vehicle control may re-

sult.

(f) Good driving practice

If the transmission repeatedly shifts up

and down between fourth gear and ov-
erdrive gears when climbing a gentle

slope, shift the selector lever to the “4”

position. Be sure to shift the selector
lever to the “D” position immediately

afterward.

When towing a trailer, in order to main-

tain engine braking efficiency, do not

use overdrive.

CAUTION

Always keep your foot on the brake
pedal while stopped with the engine

running. This prevents the vehicle

from creeping.

NOTICE

Always use the brake pedal or the
parking brake to hold the vehicle on

an upgrade. Do not attempt to hold

the vehicle using the accelerator ped-
al, as this can cause the transmission

to overheat.

(g) Driving in “PWR” (Power) mode

In the “PWR” mode, the transmission is

shifted up and down at a higher vehicle
speed than in the Normal mode and a

more powerful acceleration is achieved. To

set the “PWR” mode, push in the driving
pattern selector button. The “PWR” mode

indicator light comes on.
For ordinary driving, Toyota recommends

using the Normal mode to improve fuel

economy.

(h) If you cannot shift the selector le-

ver out of “P” position

If you cannot shift the selector lever from

the “P” position even though the brake

pedal is depressed, use the shift lock
override button. For instructions, see “If

you cannot shift automatic transmission

selector lever” on page 266.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands