Toyota Land Cruiser 2004 Page 161 Owner'S Manual Download

Page: 161 / 335

153

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

YOUR RADIO ANTENNA
Lowering the antenna

The antenna automatically extends when

the radio is on, and retracts when the

radio mode is off. However, even if you
turn off the radio when the radio on the

rear seat audio system is on, the antenna

does not retract. To lower a power anten-
na, push the “

” (down) switch. Also, the

antenna automatically goes down when the

radio mode is switched off to turn on the
cassette tape player or compact disc play-

er, turning off the audio system by push-

ing  “PWR·VOL”  or  turning  the  ignition  key
to  “LOCK”  position.
Some  models  also  have  an  antenna

printed on the inside of the right side
quarter window.

NOTICE

To prevent damage to the antenna,
make sure it is retracted before

driving your Toyota through an au-

tomatic car wash.

The antenna mast has to be ex-

tended higher than 100 mm (3.94

in.) length when the audio is on.
Extend the antenna mast when the

radio signal is weak.

Putting a window tint (especially,

conductive or metallic type) on the

right

−

hand rear quarter window may

affect the reception of radio or mo-

bile telephone. For the installation

of the window tint, consult with
your Toyota dealer.

Down

Adjusting the power antenna

To  adjust  the  antenna  height,  push  the
switch.
Confirm  that  no  one  is  close  enough  to
get  pushed  before  extending  the  antenna.
Clean  the  antenna  mast  periodically  with
a  clean  dry  cloth.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands