Toyota Land Cruiser 2004 Page 202 Owner'S Manual Download

Page: 202 / 335

194

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

For front seats

The cup holder can be adjusted to the

size of cups by changing the separator

position or moving the separator arms.
You can use it as an accessory box by

removing the separator inside.

19C008

For front seat

To use a cup holder in the console box.

1. Open the console box lid. Pull down

the knob so that the cup holder swings

down.

2. While holding the console box lid with

your hand, push down the cup holder

to be secured.

NOTICE

When you use the cup holder in the

console box, make sure it is se-

curely locked.

Do not rest your arm on the cup

holder in the console box.

Wipe up spilt drink at once.

For second seats

For third seats (right

−

hand side)

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands