Toyota Land Cruiser 2004 Page 92 Owner'S Manual Download

Page: 92 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

13c565

CAUTION

Never install a rear

−

facing child re-

straint system on the front passen-

ger seat. In the event of an acci-

dents, the force of the rapid infla-
tion of the front passenger airbag

can cause death or serious injury

to the child if the rear

−

facing child

restraint system is installed on the

front passenger seat.

Do not install a child restraint sys-
tem on the third seat if it interferes

with the lock mechanism of the sec-

ond seats. Otherwise, the child or
second seat occupant(s) may be

killed or seriously injured in case

of sudden braking or a collision.

If the driver’s seat position does

not allow sufficient space for safe

installation, install the child re-
straint system on the second right

seat.

1. Run the lap and shoulder belt through

or around the infant seat following the
instructions provided by its manufactur-

er and insert the tab into the buckle

taking care not to twist the belt. Keep
the lap portion of the belt tight.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands