Toyota Land Cruiser 2004 Owner'S Manual Download Page 37

Page: 37 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

Fuel tank cap

12C503

This indicates that the fuel filler door

is on the left side of your vehicle.

1. To open the fuel filler door, pull the

lever.
When refueling, turn off the engine.

CAUTION

Do not smoke, cause sparks or al-
low open flames when refueling.

The fumes are flammable.

When opening the cap, do not re-
move the cap quickly. In hot weath-

er, fuel under pressure could cause

injury by spraying out of the filler
neck if the cap is suddenly re-

moved.

12C006b

2. To remove the fuel tank cap, turn

the cap slowly counterclockwise,
then pause slightly before removing

it. After removing the cap, hang it

on the cap hanger.

It is not unusual to hear a slight swoosh

when the cap is opened. When installing,
turn the cap clockwise till you hear a

click.
If the cap is not tightened securely, the
malfunction indicator lamp comes on.

Make sure the cap is tightened securely.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Toyota Land Cruiser 2004, Owner'S Manual, Page: 37 / 335

Search results

Summary of Contents for Land Cruiser 2004

Reviews: