Toyota Land Cruiser 2004 Page 96 Owner'S Manual Download

Page: 96 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

13c501b

Do not install a child restraint sys-
tem on the third seat if it interferes

with the lock mechanism of the sec-

ond seats. Otherwise, the child or
second seat occupant(s) may be

killed or serious injured in case of

sudden braking or a collision.

If the driver’s seat position does

not allow sufficient space for safe

installation, install the child re-
straint system on the second right

seat.

1. Run the lap and shoulder belt through

or around the convertible seat following
the

instructions

provided

its

manufacturer and insert the tab into

the buckle taking care not to twist the
belt. Keep the lap portion of the belt

tight.

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the lap and shoulder portions

of the belt are not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent your

child from properly latching the tab
and buckle.

If the seat belt does not function
normally, it cannot protect your

child from death or serious injury.

Contact

your

Toyota

dealer

immediately. Do not install the child

restraint seat on the seat until the

seat belt is fixed.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands