Toyota Land Cruiser 2004 Page 297 Owner'S Manual Download

Page: 297 / 335

289

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

NOTICE

Be careful not to spill the engine
oil on the vehicle components.

Avoid overfilling, or the engine

could be damaged.

Check the oil level on the dipstick

once again after adding the oil.

ENGINE OIL SELECTION

“Toyota Genuine Motor Oil” is filled in

your Toyota vehicle. Use Toyota approved
“Toyota Genuine Motor Oil” or equivalent

to satisfy the following grade and viscos-

ity.
Oil grade:

API grade, SL “Energy

−

Conserving” or

ILSAC multigrade engine oil

Recommended viscosity:

Temperature range anticipated before next oil

change

SAE 5W

−

SAE 5W

−

30 is the best choice for

good fuel economy, and good starting

in cold weather.
If SAE 5W

−

30 oil is not available,

SAE 10W

−

30 oil may be used. Howev-

er, it should be replaced with SAE

−

30 at the next oil change.

API service symbol

ILSAC certification mark

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands