Toyota Land Cruiser 2004 Page 48 Owner'S Manual Download

Page: 48 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

TUMBLING SECOND SEAT

1. Lower the outer head restraint to the

lowest position and pull up the cen-

ter head restraint. Unlock the seat-
back and fold it down.

Tumbling the rear seats will enlarge the

luggage compartment. See “Cargo and
luggage” on page 224 for precautions

when loading luggage.

2. Unlock the seat cushion. Swing the

whole seat up and forward.

3. Hook the strap.

When returning the second seat to its
original position, put the holding strap into

the hole.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands