Toyota Land Cruiser 2004 Page 236 Owner'S Manual Download

Page: 236 / 335

228

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

All season tires, however, do not have

adequate

traction

performance

compared with snow tires in heavy or

loose snow. Also, all season tires fall

short in acceleration and handling

performance compared with summer

tires in highway driving.
The details about how to distinguish

summer tires from all season tires are

described on page 216.

CAUTION

Do not mix summer and all sea-

son tires on your vehicle as

this can cause dangerous han-

dling characteristics, resulting

in loss of control.

Do not use tires other than the

manufacturer’s

designated

tires, and do not mix tires or

wheels of the sizes different

from the originally equipped

tires and wheels as this could

result in loss of control and

could cause death or serious

injury.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands