Toyota Land Cruiser 2004 Page 259 Owner'S Manual Download

Page: 259 / 335

251

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

CAUTION

Do not attempt to remove the radiator
cap when the engine and radiator are

hot. Serious injury could result from

scalding hot fluid and steam blown
out under pressure.

7. After the engine coolant temperature

has cooled to normal, again check the
coolant level in the reservoir. If neces-

sary, bring it up to half full again. Seri-

ous coolant loss indicates a leak in the
system. You should have it checked as

soon as possible at your Toyota dealer.

If you have a flat tire—

1. Reduce your speed gradually,

keeping a straight line. Move cau-

tiously off the road to a safe place

well away from the traffic. Avoid

stopping on the center divider of

a highway. Park on a level spot

with firm ground.

2. Stop the engine and turn on your

emergency flashers.

3. Firmly set the parking brake and

put the transmission in “P”.

4. Have everyone get out of the ve-

hicle on the side away from traffic.

5. Read the following instructions

thoroughly.

CAUTION

When jacking, be sure to observe

the following to reduce the possi-

bility of personal injury:

Follow jacking instructions.

Do not put any part of your

body under the vehicle sup-

ported by the jack. Otherwise,

personal injury may occur.

Do not start or run the engine

while your vehicle is supported

by the jack.

Stop the vehicle on a level firm

ground, firmly set the parking

brake and put the transmission

in reverse. Block the wheel di-

agonally opposite to the one

being changed if necessary.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands