Toyota Land Cruiser 2004 Page 136 Owner'S Manual Download

Page: 136 / 335

128

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

Either of the following conditions may

occur, but do not indicate a malfunc-

tion.

The light may stay on for about 60

seconds after the ignition key is turned

to “ON” position. It is normal if it turns
off after a while.

Depressing the brake pedal repeatedly
may turn on the light. It is normal if it

turns off after a few seconds.

(j) Open Door Warning Light

This light remains on until all the side

doors and back door are completely
closed.

(k) Unengaged “Park” Warning Light

This light warns that the transmission

“Park” mechanism is not engaged. If the

four

−

wheel drive control is in the “N” posi-

tion while the selector lever is in the “P”

position, the transmission will disengage

and the wheels will not lock.

CAUTION

To restore the park function, shift the
four

−

wheel drive control out of “N”,

or the vehicle can move.

(l) Automatic Transmission Fluid Tem-

perature Warning Light

This light warns that the automatic trans-

mission fluid temperature is too high.
If this light comes on while you are driv-

ing, slow down and pull off the road. Stop
the vehicle at a safe place and put the

selector lever in “P” and leave the engine

idling until the light goes off. If the light
goes off, you can start the vehicle again.

If the light does not go off, call a Toyota

dealer or qualified repair shop for assis-
tance.

NOTICE

Continued driving with the warning
light on may damage the automatic

transmission.

(m) Vehicle Stability Control System and

Active Traction Control System

Warning Light

This light warns that there is a problem
somewhere in the vehicle stability control

system and/or active traction control sys-

tem.
If the “VSC/TRAC” warning light and “VSC

OFF” indicator light come on, have your
vehicle checked by Toyota dealer as soon

as possible. However, it is no problem

that the “VSC/TRAC” warning light comes
on when the brake actuator temperature

becomes high. (For details, see “Active

traction control system” on page 145.)
The lights will come on with the ignition

key  turned  to  “ON”,  and  will  go  off  after
a  few  seconds.
The  lights  may  come  on  for  60  seconds

after the ignition key is turned to “ON”
position. It is normal if they go out after

a while.
Depressing the brake pedal repeatedly

may turn on the lights. it is normal if they

go out after a few seconds.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands