Toyota Land Cruiser 2004 Page 130 Owner'S Manual Download

Page: 130 / 335

122

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

Service reminder indicators and warning buzzers

If the indicator or buzzer comes on...

Do this.

(a)

(b)

(c)

(d)

(e)

(f)

(g)

(h)

(Indicator and buzzer)

If parking brake is off, stop immediately and contact Toyota dealer.

Fasten driver’s seat belt.

Fasten front passenger’s seat belt.

Stop and check.

Replace engine oil.

Take vehicle to Toyota dealer.

Fill up tank.

Take vehicle to Toyota dealer immediately.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands