Toyota Land Cruiser 2004 Page 83 Owner'S Manual Download

Page: 83 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

This indicator comes on when the igni-

tion key is turned to the “ON” position.
It goes off after about 6 seconds. This

means the SRS side airbags and curtain

shield airbags are operating properly.

This warning light system monitors the

airbag sensor assembly, front airbag sen-
sors, side and curtain shield airbag sen-

sors, curtain shield airbag sensors, driv-

er’s seat position sensor, driver’s seat belt
buckle switch, seat belt pretensioner as-

semblies, inflators, warning light, roll sens-

ing of curtain shield airbags off indicator
light, interconnecting wiring and power

sources. (For details, see “Service remind-

er indicators and warning buzzers” on
page 122.)

If either of the following conditions occurs,

this indicates a malfunction of the airbags

or seat belt pretensioners. Contact your
Toyota dealer as soon as possible.

When the ignition key is turned to the

“ON” position, the light does not come
on, remains on or flashes.

The light comes on or starts flashing
while driving.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands