Toyota Land Cruiser 2004 Page 278 Owner'S Manual Download

Page: 278 / 335

270

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

Road tar: Remove with turpentine or

cleaners that are marked safe for painted

surfaces.

NOTICE

Do not use organic substances (gaso-
line kerosene, benzine or strong sol-

vents) which may be toxic or cause

damage.

3. Rinse

thoroughly—dried

soap

can

cause streaking. In hot weather you

may need to rinse each section right

after you wash it.

4. To prevent water spots, dry the vehicle

using a clean soft cotton towel. Do not

rub or press hard—you might scratch
the paint.

Automatic car wash

Your vehicle may be washed in an auto-

matic car wash, but remember that the
paint can be scratched by some types of

brushes, unfiltered washing water, or the

washing process itself. Scratching reduces
paint durability and gloss, especially on

darker colors. The manager of the car

wash should be able to advise you wheth-
er the process is safe for the paint on

your vehicle.

NOTICE

To prevent damage to the antenna,
make sure it is retracted before driv-

ing your Toyota through an automatic

car wash.

Waxing your Toyota
Polishing and waxing is recommended

to maintain the original beauty of your
Toyota’s finish.

Apply wax once a month or if the vehicle
surface does not repel water well.

1. Always wash and dry the vehicle be-

fore you begin waxing, even if you are
using a combined cleaner and wax.

2. Use a good quality polish and wax. If

the finish has become extremely weath-

ered, use a car

−

cleaning polish, fol-

lowed by a separate wax. Carefully fol-
low the manufacturer’s instructions and

precautions. Be sure to polish and wax

the chrome trim as well as the paint.

Windshield washer nozzles: Make sure

that the nozzles do not become blocked
when waxing. If a nozzle becomes

blocked, contact your Toyota dealer to

have the vehicle serviced.

NOTICE

If a nozzle becomes blocked, do not
try to clear it with a pin or other

object. The nozzle will be damaged.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands