Toyota Land Cruiser 2004 Page 95 Owner'S Manual Download

Page: 95 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

13c567

CAUTION

Never install a rear

−

facing child re-

straint system on the front passen-

ger seat. In the event of an acci-

dent, the force of the rapid inflation
of the front passenger airbag can

cause death or serious injury to the

child if the rear

−

facing child re-

straint system is installed on the

front passenger seat.

13c568

Move seat fully back

A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger

seat only when it is unavoidable.
Always move the seat as far back

as possible, because the front pas-

senger airbag could inflate with
considerable

speed

and

force.

Otherwise, the child may be killed

or seriously injured.

On vehicle with side airbags and
curtain shield airbags, do not allow

the child to lean his/her head or

any part of his/her body against the
door or the area of the seat, front

or rear pillar, front, center or rear

garnish or roof interior from which
the side airbags or curtain shield

airbags deploy even if the child is

seated in the child restraint system.
It is dangerous if the side airbag

and curtain shield airbag inflate,

and the impact could cause death
or serious injury to the child.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands