Toyota Land Cruiser 2004 Page 108 Owner'S Manual Download

Page: 108 / 335

100

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

NOTICE

If ice should jam the mirror, do not
operate the control or scrape the mir-

ror face. Use a spray de

−

icer to free

the mirror.

—Folding rear view mirrors

The rear view mirrors can be folded

backward for parking in compact areas.

To fold the rear view mirror, push back-

ward.

CAUTION

Do not drive with the mirrors folded
backward. Both the driver and pas-

senger side rear view mirrors must

be extended and properly adjusted
before driving.

13C010

Adjust the mirror so that you can just

see  the  rear  of  your  vehicle  in  the  mir-
ror.
Pushing  the  switch  changes  the  mode
between  “AUTO”  and  “DAY”.

The indicator comes on when the “AUTO”

mode is selected.

“DAY” mode: The mirror surface is nor-

mal.
“AUTO” mode: If the mirror detects

light from the headlights of the vehicle

behind you, the mirror surface darkens
slightly to reduce the reflected light.

Anti

−

glare inside rear view

mirror—

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands