Toyota Land Cruiser 2004 Page 258 Owner'S Manual Download

Page: 258 / 335

250

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

If the engine speed does not increase

when the accelerator pedal is de-

pressed, the electronic throttle control
system may be faulty. Move the vehicle

to a safe place by means of creeping

and call a Toyota dealer for assistance:

1. Depress the brake pedal and shift to

the “D” position.

2. Gradually release the brake pedal, and

the vehicle starts to move by creeping.

After arriving at a safe place, stop the
vehicle and call a Toyota dealer for

assistance.

CAUTION

The above method of moving the
vehicle is for emergency. Use it

only for moving minimum distances

to a safe place.

Be especially careful to prevent er-

roneous pedal operation.

If your vehicle overheats

If your engine coolant temperature

gauge indicates overheating, if you ex-

perience a loss of power, or if you hear
a loud knocking or pinging noise, the

engine has probably overheated. You

should follow this procedure...

1. Pull safely off the road, stop the ve-

hicle and turn on your emergency

flashers. Put the transmission in “P”
and apply the parking brake. Turn off

the air conditioning if it is being used.

2. If coolant or steam is boiling out of the

radiator or reservoir, stop the engine.

Wait until the steam subsides before
opening the hood. If there is no coolant

boiling over or steam, leave the engine

running.

CAUTION

To help avoid personal injury, keep
the hood closed until there is no

steam. Escaping steam or coolant is

a sign of very high pressure.

3. Visually check to see if the engine

drive belt (fan belt) is broken or loose.

Look for obvious coolant leaks from the
radiator, hoses, and under the vehicle.

However, note that water draining from

the air conditioning is normal if it has
been used.

CAUTION

When the engine is running, keep
hands and clothing away from the

moving fan and engine drive belts.

4. If the engine drive belt is broken or the

coolant is leaking, stop the engine im-

mediately. Call a Toyota dealer for as-
sistance.

5. If the engine drive belt is O.K. and

there are no obvious leaks, you may
help the engine cool down more quickly

by running it at about 1500 rpm for a
few minutes with the accelerator pedal

lightly depressed.

6. Check the coolant reservoir. If it is dry,

add coolant to the reservoir while the

engine is running. Fill it about half full.

If you cannot increase the en-

gine speed

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands