Toyota Land Cruiser 2004, Owner'S Manual

Page: 29 / 335

21
2004 L/C100 from Aug ’03 Prod. (OM60A04U)
4. Install the lid with the 2 screws.
5. Install the module into the key frame
and secure the cover with the screw.
6. When pushing any switch on the wire-
less key, make sure the indicator light
comes on.
NOTICE
!
Make sure the positive side and
negative side of the battery are
faced correctly.
!
Do not replace the battery with wet
hands. Water may cause unexpected
rust.
!
Do not touch or move any compo-
nents inside of the transmitter, or
it may interfere with proper opera-
tion.
!
Be careful not to bend the electrode
of the battery insertion and that
dust or oils do not adhere to the
case.
!
Take care not to lose the screws.
!
Close the cover securely.
Power windows
12C010a
The windows can be operated with the
switch on each side door.
The power windows work when the ignition
switch is in the “ON” position.
Key off operation: If both front doors are
closed, they work for 45 seconds even
after the ignition switch is turned off. They
stop working when either front door is
opened.
OPERATING THE DRIVER’S WINDOW
Use the switch on the driver’s door.
Normal operation:
The window moves as
long as you hold the switch.
To open: Lightly push down the switch.
To close: Lightly pull up the switch.
12C011a
Automatic operation: Push the switch
completely down or pull it completely up,
and then release it. The window will fully
open or close. To stop the window part-
way, lightly move the switch in the oppo-
site direction and then release it.
Jam protection function: If something
gets caught between the window and win-
dow frame during automatic closing opera-
tion or key off closing operation, the win-
dow stops and opens halfway.
If the window receives a strong impact,
this function may work even if nothing is
caught.