Toyota Land Cruiser 2004 Page 264 Owner'S Manual Download

Page: 264 / 335

256

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

—Loosening wheel nuts

4. Loosen all the wheel nuts.

Always loosen the wheel nuts before

raising the vehicle.
Turn the wheel nuts counterclockwise

to loosen. To get maximum leverage,

fit the wrench to the nut so that the

handle is on the right side, as shown

above. Grab the wrench near the end

of the handle and pull up on the han-

dle. Be careful that the wrench does

not slip off the nut.
Do not remove the nuts yet—just un-

screw them about one

−

half turn.

CAUTION

Never use oil or grease on the

bolts or nuts. The nuts may loos-

en and the wheels may fall off,

which could cause a serious ac-

cident.

—Positioning the jack

5. Position the jack at the correct

jack point as shown.

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands