Toyota Land Cruiser 2004 Page 87 Owner'S Manual Download

Page: 87 / 335

2004 L/C100 from Aug ’03 Prod. (OM60A04U)

(A) INFANT SEAT INSTALLATION
An infant seat must be used in rear

−

facing position only.

CAUTION

Do not install a child restraint system
on the third seat if it interferes with

the lock mechanism of the second

seats. Otherwise, the child or second
seat occupant(s) may be killed or se-

riously injured in case of sudden

braking or a collision.

1. Run the center lap belt through or

around the infant seat following the
instructions provided by its manufactur-

er and insert the tab into the buckle

taking care not to twist the lap belt.

—Installation with 2

−

point

type seat belt

Summary of Contents for Land Cruiser 2004
















































































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands

Toyota Land Cruiser 2004, Owner'S Manual

Search results

Summary of Contents for Land Cruiser 2004

Reviews:

Related manuals for Land Cruiser 2004

Brands by name

Popular brands