Toshiba E-STUDIO2008A, Service Manual, Page: 477 / 1016

6
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
6 - 93
Notes:
Perform adjustment for the folding position first because the stapling position must be adjusted
referring to the folding line.
Phenomenon Contents Adjustment
Fig.6-98
When the folding position is deviates
from the specified one by more than
-2.0 mm Increase the value of the folding
position adjustment in order to move
the folding stopping position (the
position of the stapling hooks) of the
stacker upward.

P. 6-96 "[ 2 ] Folding position
adjustment"
Fig.6-99
When the folding position is deviates
from the specified one by more than
2.0 mm Decrease the value of the folding
position adjustment in order to move
the folding stopping position (the
position of the stapling hooks) of the
stacker downward.

P. 6-96 "[ 2 ] Folding position
adjustment"
Fig.6-100
When the stapling position is
deviated from the specified one
more than -0.50 mm Decrease the value of the stapling
position adjustment in order to move
the stapling stopping position (the
position of the stapling hooks) of the
stacker downward.

P. 6-94 "[ 1 ] Saddle stapling
position adjustment"
Fig.6-101
When the stapling position is
deviated from the specified one
more than 0.50 mm Increase the value of the stapling
position adjustment in order to move
the stapling stopping position (the
position of the stapling hooks) of the
stacker upward.

P. 6-94 "[ 1 ] Saddle stapling
position adjustment"
Specified
folding position
Stacker hook
Folding position
Specified
folding position
Folding position
Stacker hook
Stapling position
Folding position
Stacker hook
Stapling position
Folding position
Stacker hook