Toshiba E-STUDIO2008A, Service Manual, Page: 423 / 1016

6
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
6 - 39
6.6.13 RADF scan noise reduction (Scanning Function)
The reduction amount of color streaks generated when FS-08-8300 (ADF scan noise reduction) is set
to 0, 1 or 2 can be adjusted with the following codes.
< 05 Adjustment Mode >
<Procedure>
Procedure is same as that of

P. 6-24 "6.4.2 Density adjustment".
Color
Item to be
adjusted
Remarks
Original mode
Text/
photo
Text Photo
User
custom
8413 8414 8415 8412 RADF scan noise
reduction When the value decreases, the effect of reducing
streaks becomes larger.
When the value increases, the effect of reducing
streaks becomes smaller.
When "0" is set, this function is disabled.
Acceptable values: 0 to 200
(Default: 100)
Notes:
If too small a value is set, the text may not
be printed clearly.
Black
Item to be
adjusted
Remarks
Original mode
Text/
photo
Text Photo
Gray
scale
User
custom
7401 7402 7403 7404 7400 RADF scan
noise
reduction When the value decreases, the effect of
reducing streaks becomes larger.
When the value increases, the effect of
reducing streaks becomes smaller.
When "0" is set, this function is disabled.
Acceptable values: 0 to 200
(Default: 100)
Notes:
If too small a value is set, the text
may not be printed clearly.