5
© 2015 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SELF-DIAGNOSTIC MODE
5 - 3
[B] Cancelation of the self-diagnostic mode
The modes, which can be entered from [FS Menu], can be canceled by the following methods.
•
When [FS Menu] is displayed on the screen:
Press [FS Menu] to return to the menu screen. Press [NORMAL].
The self-diagnostic mode finishes and the [HOME] screen appears. Rebooting/non-rebooting of the
equipment will be performed depending on the mode worked and the code operated.
•
When only [Return] is displayed on the screen:
Press [Return] for several times until [FS Menu] is displayed on the screen. When [FS Menu]
appears, press it.
•
When neither [Return] nor [FS Menu] are not displayed on the screen:
Press the [ON/OFF] button for a few seconds to shut down the equipment.
To cancel the modes, which can be entered from [HS Menu], and the HA modes, press the [ON/OFF]
button for a few seconds to shut down the equipment.
[C] State transition diagram of self-diagnosis modes
Fig.5-1
*
Be sure to cancel the self-diagnostic mode before customers start using the equipment.
[D] Changing/setting of the service password
(1)
The [SETTINGS] screen is displayed by press [SETTINGS] on [FS Menu].
(2)
Press [Service Password] to change or reset the password.
[POWER] ON
[POWER] OFF
Ready
To user
Warming up
Normal
FS Menu
[FUNCTION
CLEAR]
+
[START]
+
[POWER]ON
Authentication
screen
FS Menu
Each mode
HS Menu
HS Menu
Each mode
HA Mode
[HOME]
+
[ACCESS]
+
[POWER]ON
HA Mode
[HOME]
+
[START]
+
[POWER]ON
Authentication
screen
Authentication
screen