6
© 2015 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
6 - 37
6.6.9
Background offsetting adjustment for RADF
<05 Adjustment Mode>
<Procedure>
The procedure is the same as that of
P. 6-34 "6.6.2 Density adjustment".
6.6.10
Adjustment of the capacity and image quality of SlimPDF
The compression quality or the resolution is adjusted to reduce the file capacity of a SlimPDF or
improve its quality.
< 05 Adjustment Mode >
<Procedure>
(1)
Performs FS-05.
(2)
Key in the codes to be adjusted and press the [START] button.
(3)
Key in the adjustment value. (To correct a value once keyed in, press the [CLEAR] button.)
(4)
Press the [OK] button to store the value in memory. -> The equipment goes back to the ready
state.
(5)
Let the equipment restart. Acquire the SlimPDF file and check it.
(6)
If the desired image quality has not been attained, repeat step (1) to (5).
RADF
Item to be
adjusted
Remarks
7025
Background
density processing
/ RADF scanning
(Black and white)
Adjusts the density of background for RADF scanning.
The smaller the adjustment value is, the lighter the background
becomes.
The larger the adjustment value is, the darker the background
becomes.
Acceptable values: 0 to 255 (Default: 128)
7026
Background
density processing
/ RADF scanning
(Color)
Adjusts the density of background for RADF scanning.
The smaller the adjustment value is, the lighter the background
becomes.
The larger the adjustment value is, the darker the background
becomes.
Acceptable values: 0 to 255 (Default: 128)
Code
Item to be
adjusted
Remarks
9104
Compression
quality of
SlimPDF
background
processing
The smaller the value, the less the file capacity and the lower the image
quality becomes. The larger the value, the greater the file capacity and
the higher the image quality becomes.
Acceptable values: 0 to 10 (Default: 5)