5
© 2015 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SELF-DIAGNOSTIC MODE
5 - 49
Explanation for each item
1: Recovers all partitions.
2: Recovers root partition only.
3-8: Recovers each partition shown above.
Notes:
More than one partition can be selected. (">" is displayed on the left of the selected number.)
If an error occurs during recovery, initialize the file system (HDD).
[C] Initialize the File System (Initialize HDD)
In case that an error occurs during the file system check and the partition cannot be recovered with the
recovery, each partition can be initialized.
It is recommended to export the user information such as address book before performing this function.
Fig.5-35
Explanation for each item
1: Initializes partitions other than root one and creates initial files.
2: Initializes a partition (/work) and creates an initial file.
3: Initializes a partition (/registration) and creates an initial file.
4: Initializes a partition (/backup) and creates an initial file.
5: Initializes a partition (/imagedata) and creates an initial file.
6: Initializes a partition (/storage) and creates an initial file.
7: Initializes a partition (/encryption) and creates an initial file.
8: Initializes a partition (/TAT) and creates an initial file.
Notes:
More than one partition can be selected. (">" is displayed on the left of the selected number.)
Notes:
•
If [1. Except /] or [7. /encryption] is selected, applications and OS data in the equipment are also
initialized. In this case, the applications and the file system must be reinstalled. Install the system
software (HD Data) by performing [49] -> [4] after initialization.
•
If [1. Except /] is selected, minimal data necessary for normal startup are automatically
recovered.
•
If [1. Except /] is selected, log database is also initialized. Back up the data before initializing if
necessary.
•
If [1.Except/] is selected, do not perform SRAM data formatting (Clear SRAM) before the normal
start-up.
Firmware Assist Mode
Select number(1-8) and press START key
1. Clear Error Flag in Software Installation
2. Format Root Partition
3. Format HDD
4. Clear SRAM
5. Key Backup Restore
6. Erase HDD Securely
7. Erase SRAM Securely
8. Clear Service Tech Password