243
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
·
Rules intended to activate dialing will not be valid in
Answer only
programs or audio
streams.
·
For more details about rules see
4. Enter a
Stream Name
, then add a
Caller ID
and configure the codec to
Dial only
. Then click
Next
. Note: The caller ID is used to identify calls.
Routing Type Options:
Default
No
Dial Route
or
Answer Route
is configured. An incoming call will be
routed to an audio stream on a first-come, first-served basis in a multi-
stream program. Note: By default IP streams are routed using audio
ports.
Deterministic
Select a
Dial Route
or
Answer Route
to configure deterministic routing
of multiple audio streams using transports like ISDN or POTS. Use of
Dial
and
Answer Routes
is not usually necessary over IP because
dedicated ports or
Line Hunt
mode call answering is employed. However
dial routes can be used over IP when a single stream on an answering
codec answers using POTS and/or ISDN connections, as well as IP. This
effectively creates an answering group using different transports. See
information.
Line Hunt
Create line hunt groups for multiple incoming callers on a first come, first
served basis. This is ideal for separating groups of inputs and outputs
between different studios or stations. See
more information.