167
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
POTS Config Settings
The default
POTS Answer
module
Config
settings, which can be viewed in the
POTS Answer
panel
are:
·
Tieline Codecs
Session Data.
·
The
Other
algorithm.
This configuration will accept the settings from an incoming Tieline codec when it dials with
session data enabled. It will also allow the codec to answer a call from a Comrex POTS codec
supporting the
Other
algorithm setting.
To reset POTS answering to default settings click the
Options symbol
in the top right-hand corner
of the panel and select
Reset all to factory defaults
.
Answering Calls from Non-Tieline POTS Codecs
1. Open the HTML5 Toolbox Web-GUI and click
Transport
and then
POTS Answer
.
2. Click the
Edit
button to configure settings.
3. Select the
Sessionless Only
check-box when only non-Tieline codecs are dialing a Tieline
codec over POTS. This allows you to select the default encoding setting and
Route
the
incoming call to a nominated audio stream via a corresponding
Answer Route
in the answering
codec program if required.