195
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
2. Click the blue
Plus symbol
to add a backup
Output Audio Source
, or click the
Minus
symbol
to remove an
Output Audio Source
.
3. Click the drop-down arrow to select an
Output Audio Source
option.
4. Configure silence threshold parameters to enable a preferred backup option, as well as
resume thresholds for reactivating a previous source.
Important Notes for File Playback:
·
Ensure MP3 recordings used are not variable bit rate files.
·
File playback audio is sent directly to the codec outputs and therefore IGC is not
available. When you create your MP2 or MP3 files ensure the audio levels match the
audio reference level of your codec and that peaks average at the correct levels.
·
USB backup audio is only sent to the outputs of the local codec to which a USB stick
is attached. USB file audio is not sent to encoders and cannot be transmitted via an
audio stream to another codec.
·
The USB stick can be inserted or removed at any time as long as the codec is not
already playing audio in failover mode. Removing the USB stick while audio is playing