164
Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
20.9
Configuring POTS
Two slots are available for inserting optional POTS modules into the codec. These can be
configured using the codec front panel or the HTML5 Toolbox Web-GUI. See
for additional information on POTS.
You can use the HTML5 Toolbox Web-GUI to configure a dial and/or answer program with POTS
settings. You may also need to:
1.
Configure POTS module settings
2.
Configure POTS Answering settings
20.9.1
Configuring POTS Modules
POTS settings in the
Modules panel
menu determine how your codec will connect at a particular
site. You can copy similar programs between codecs installed at different locations and also
configure site-specific settings for how each module should connect. The default
Config
settings for
POTS modules are designed to suit Tieline codecs. These settings will need to be adjusted to
connect to non-Tieline POTS codecs or connect in
Analog Phone
mode.
Configuring POTS G5 Modules
1. Open the HTML5 Toolbox Web-GUI and click
Transport
and then
Modules
to view and
configure POTS site settings.
Important Notes:
The POTS module
Status
is displayed in the
Modules panel
.
No
Phone Line
is displayed when a cable is detached;
Ready
is displayed when a cable is
attached and the line voltage is good.
2. Click to select
Module 1
or
Module 2
.
3. Click the
Edit
button to configure settings.
4. Click the drop down arrow to adjust the
Answer Mode
and select how the module in the codec
will be able to answer incoming POTS calls. Options include:
·
POTS Codec:
allows the POTS G5 module to receive incoming audio data over a POTS line.
·
Analog Phone:
configures the POTS G5 module to receive a standard analog phone call.
·
Disabled:
disables the POTS G5 module from receiving a
POTS Codec
or
Analog Phone
call.