141
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
network for them to be supported in your codec.
Reconfigure Default Primary, Secondary and Tertiary Interfaces
It is possible to reconfigure the default
Primary
(
ETH1
),
Secondary
(
ETH2
) and
Tertiary
(
Wi-
Fi
) interfaces in the codec. As an example, you may want to select
Primary
as the dialing
interface in a program and then copy this program onto multiple codecs. However, the actual
primary interface used at each location can vary for each codec. For one codec it may be an
Ethernet interface and for another it may be a Wi-Fi connection. This allows you to configure
site-specific settings to suit the available network interfaces at different remote locations.
1. Open the HTML5 Toolbox Web-GUI and click
Transport
and then click
IP Via
Mapping
to open this panel.
2. Click the drop-down arrow for each interface to select the preferred default setting.
3. Click
Save
to store the configuration.
Important Note:
Fuse-IP cannot be configured as a default Primary, Secondary or
Tertiary
Via
.
Configure Firewall Settings
The
Firewall
menu can be used to enable or disable a range of firewall-related network services, or
limit ping to only work in a local subnet.
1. Open the HTML5 Toolbox Web-GUI and click
Settings
at the top of the screen, then click
Options
to display the
Options panel
.
2. Select
Firewall
and then click
Edit
to adjust settings.
3. Click
Save
to store the new configuration settings.