160
Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
Important Note:
B channels can only be selected once and a
Summary
of allocated B
channels is displayed on the left-hand side of the
ISDN Answer
panel.
Single B Channel Config
To use a single 64kbps B channel for a connection (e.g. a 1 x Mono Peer-to-Peer audio stream):
1. Open the HTML5 Toolbox Web-GUI and click
Transport
and then
ISDN Answer
.
2. Click to select a
Config
.
3. Select a B channel from those available and then click
Save
. The connection is not bonded
if only one B channel is selected.
Multiple B Channel Bonding Config
A point-to-point audio stream can also bond multiple B channels to create higher bandwidth
connections.
1. Click to select a
Config
.
2. Select multiple B channels in the
Config
. Note: In the following example, two B channels
from
Module 2
have been selected within
Config 2
. Note that
B Channel 1
in
Module 1
has already been assigned in
Config 1
and is therefore greyed out and unavailable in
Config
2
.
3. Configure the bonding setting that best suits the audio stream associated with this
Config
.
Bonded or Unbonded
is the best setting in most situations.
Bonding Setting
Behavior
Bonded
or
Unbonded
(May
Bond)
Calls using the same algorithm from the same Tieline codec,
or sessionless calls, will attempt to bond when received. Calls
using incompatible algorithms will not be bonded
Bonded Only
Will only bond compatible algorithms. This mode will reject
incompatible calls which cannot be bonded, e.g. G.711 and
G.722
4. Click
Save
to apply changes to the
Config
.